Review: Spyderco C41CFF5 Native 5 – S90V & Fluted Carbon Fiber

I really like the Spyderco 40^th anniversary Native 5, but I know I’ll never ‘hard use’ that knife (whatever that means these days). When this very same knife in a S90V blade was announced, I took notice. This new C41CFF5 could be a neat companion piece to my anniversary knife, one that I actually would use a lot easier.  It turns out that I liked this ‘plain’ Native a lot more than just something to have on me to prevent scratching that beautiful Odin’s eye Damascus steel of the anniversary Native.

Fluted history
This knife’s main draw, for me, is that gorgeous fluted handle. I really like its backstory, or what snippets I picked up from it. Spyderco has been working on fluted handles for years, way before the C41CFF5 was conceived. The fluted titanium Military was the first knife to come out in 2011 and the handle finish and lock were tweaked several times during production. The fluted titanium Native 5 won American Made Knife of the Year at the 2011 Blade Show, but didn’t become available until 2013. Both knives were dropped from production in 2017. Sure it’s a respectable run, but the fluted titanium knives was always only available in small quantities. Was that because of a lack of interest? Nope. Apparently, they were just extremely difficult to make, in a consistent quality and on a production scale.

Still, Spyderco wanted to pursue this fluted handle design. So they turned to carbon fiber, hoping that that would be a lot easier to work with for -again- consistent quality and on a production scale. Unfortunately, that too proved very challenging. So much so that this particular knife, was cancelled during production and the finished fluted handles were used for the limited anniversary run of 40^th anniversary natives. Still, Spyderco hung on and in August 2017, the C41CFF5 fluted native was released for one production run.

To date, we haven’t seen any other new fluted handle designs. I just love Spyderco’s tenacity to keep finding a way to make the design work. I’m sure that a lots of other makers would just go with a shallow engraving of a wider stripe-pattern and call it a day. This fluting itself is plentiful, spaced very close together, deep and consistent throughout the 3D handle.

Handle
The Native’s fluted carbon fiber grip is a knifeknut’s dream; the look is unique and very aesthetically pleasing and  it actually works. It offers a wonderful grip, not too smooth not too rough; just right for this office worker’s dainty hands. The 3D machining fits my hand really well and the fluting adds just the right amount of traction for suburban EDC work. It’s just a plain awesome handle, and I wish we will see more knives with this handle design. But not too much, as I appreciate the fact that this is a rare and exclusive handle design. I also really appreciated the 4-way clip option. I can set it up as my left-handed utility folder and really use it. A nice touch is that the clip-screw holes feature polished steel threads sitting just a hair below the surface of the carbon fiber handle. The unused clip screw holes tend to disappear from my notice, in the dark fluted carbon fiber.

Blade
The CPM S90V blade on a Native 5 is no stranger to me, since it was also featured on the excellent 2015 forum knife. S90V ticks off all my boxes for practical EDC: it’s flat ground, around 3 inch long, leaf shaped, thin and stainless. I realize it’s not stain-proof, just stainLESS. Yes, I like to play with the occasional carbon steel that Spyderco offers, but it will be cladded with a stainless steel. I just like my knives to clean up nicely after work. I know, I’m superficial, but I’m the SpyderCollector after all and collectors like to keep their precioussessss in good looking order. Edgeholding is just plain boring. Trimming some vines in the yard, opening mail, pitching in in the kitchen for food prep, cutting up apples for lunch – it all just makes that S90V yawn with boredom. All I can say is that with my mundane suburban uses, the edge holds extremely well and it doesn’t stain.

Fit and finish
The overall fit and finish is simply superb. I was actually a bit surprised about it. This C41CFF5’s fit and finish is just as nice as any old-school Moki made Spydie. The opening and closing action is just so smooth, and the lock-up tight as the proverbial bank vault. The fit and finish is on a new level for Spyderco in my book. I can feel the difference between this C41CFF5 Native and the much older G10 Native I own,  which –rest assured- is just fine in the fit& finish department.

Overall
I realize this isn’t a cheap folder and with this knife’s MSRP, you’re getting into Sebenza territory. I like and appreciate the Chris Reeve Sebenza a lot, and I know many purists will point out that the Sebbie has better fit and finish than any Spyderco knife. That’s probably true. But … can you get a Sebenza in S90V with a 4-way clip, and a 3D fluted carbon fiber handle that actually fits your hand comfortably in a variety of grips?  … [mic drop] … 😉

Check out more info on the Native 5 at www.spydiewiki.com

Spyderco Titanium Fluted Military Mini-Review

Hard work is its own reward, but sometimes it’s hardly work and the reward can be amazing. I got this wonderful Military with fluted titanium handles recently and it is an amazing piece.

 

The fluted pattern on the handle transforms this otherwise large ‘working’ folder into an elegant gentleman’s knife. However, the  ‘fluting’ of the titanium handle does more. The first titanium Military was a solid piece, a tad heavier than most expect from a titanium handled folder. I’m sure this is because the handle on the Military is much bigger than most other production folders. The fluting removes a lot of the weight. To me, the fluted Ti Millie handles like a regular g10 Millie.

 

I showed the knife to a few non-knife people and they all agreed that it was a ‘pretty’ knife. At least that’s one thing we agreed on when it comes to knives.

 

The lock on my version doesn’t feature the steel inset in the locking bar. It’s not an issue on this specimen, the lock is perfect and it hasn’t travelled since I got it. It probably went through a hundred or more opening/closing cycles over the past two weeks.

 

The blued anodizing is done by hand and has held up fine so far. The knife has seen about two weeks’ worth of pocket time and has been washed and rinsed thoroughly after some kitchen chores, the bluing hasn’t faded yet – but it’s still early. I did give the knife its first sharpening session yesterday. Not that it really needed it, but the edge wasn’t quite how I want it – so out came the Sharpmaker.

 

And this is what makes this knife extra special to me; it was a gift from the Spydercrew for my work on the report of the new prototypes since the Amsterdam Meet. To which I can only reply: “You’re more than welcome, and thank you! Wow, seriously?! What a gorgeous Military!”  Generally, I don’t like to show off, but for this one I make an exception. I think you’ll understand.

 

If you like the Military design, this is the knife for you. The venerable design has been proven thoroughly over the years. The titanium handle adds a more durability and lock strength, while the fluted design and bluing add sophistication and class. Moreover, the fluting process also results in a rounded or ‘ 3D’ handle, it’s more comfortable to grip than the flat G10 slabs. Best of all, the weight and feel in the hand is close to the lightweight G10 version.  This is a special knife and it will be produced in small numbers. IIRC, about 50 pieces a month.

PS The inspiration to use a mirror as a background for these pictures came from fellow-spyderknut Whynot on the Spyderco Forums, check out his amazing picture-thread.